news & insights

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] Appearance Silvery or dark surface streaks and in exceptional cases black discolorations. Cause 1. Damage to the plastic melt due to excessively high

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] Appearance Usually oblong, silvery surface streaks which are open in the shapre of a U counter to the direction of flow. The material

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] A gate is a designed small opening to allow the melted plastics into the mold cavity, a successful gate design is determined by

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] Plastic injection mold consists of following basic systems: 1.Gating system 2.Ejection System 3.Cooling System 4.Forming System 5.Venting System [/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_custom_heading text=”Related Products” font_container=”tag:h2|text_align:center”][vc_basic_grid post_type=”dt_portfolio”

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] A hinge pin is a piece of cylindrical metal that holds together the two arms of a hinge in such a manner that

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] Rapid prototyping is a family of additive production processes used to assemble prototype models. These processes are known as additive methods, as material