news & insights

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] First, the phenomenon of scorching is as follows. (1) The temperature reflects ultra-high, or the temperature of the control of the instrument fails,

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] In the continuous production process of the mold, due to prolonged contact with the blank with higher temperature than itself, the temperature of

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] The shrinkage of the molding material has a great influence on the dimensional accuracy of the plastic parts. If the precision of the

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] The structural design and manufacturing accuracy of the mold directly affect the dimensional accuracy of the plastic parts. If the rigidity of the

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] The greater the affinity of the die-cast alloy and the die steel, the easier it is to fuse and bond together. After the

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] It is indeed a difficult problem to completely solve the problem of deformation of large-area injection molded parts. In production, we have summarized

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] If you do not achieve the desired results, you can only take the form of a model. Because most people do not use

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] In addition to heat and lubrication of the billet prior to warm extrusion, the extrusion punch and die must be preheated. Generally preheated

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] In the stamping process, once mold clamping is inflexible or even stuck, it is necessary to immediately stop production, find the cause of