insights

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] 1.Advantage (1) The heating temperature is low, which has little influence on the microstructure and properties of the base metal and is easy

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] 1. Selection principle of pouring position 1) The important working surface or working surface of the casting should be downward. If it is

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] Sand casting has a wide range of applications and is suitable for almost all parts production. For some large, single or small batch

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] The advantages of pressure casting are as follows: 1) High productivity, can be die-casted 50 to 150 times per hour, up to 500

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] The advantages of low pressure casting are as follows: 1) The pouring pressure and speed are easy to adjust, and can adapt to

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] Centrifugal casting is the main production method for cast iron pipes, cylinder liners, copper bushings and bimetal bearings. The maximum weight of castings

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] The structure of the blow molding, the casting mold and the thermoforming mold is relatively simple, and the structures of the compression molding

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] Mold design and manufacturing are closely related to plastic processing. The success or failure of plastic processing depends to a large extent on

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] (1) Fixed mold plate (panel): fix the front mold on the injection molding machine. (2) Flow channel plate (water plate): remove the waste